BluOS will allow any Bluetooth enabled smartphone, tablet, or computer to stream music to a BluOS Player. Now you can stream music from Pandora®, Sirius/XM®, Apple Music®, TDC Play®, and many more services to your BluOS system. This music can be played in a single room or grouped with other rooms to play through out your whole home.
The below listed BluOS Players require an external Bluetooth 4.0 USB Adapter. The IOGear GBU521 Bluetooth 4.0 USB adapter and Targus 4.0 Micro USB Adapter are both BluOS certified and approved by BluOS. All other adapters may have performance issues or not work at all. If not listed, Bluetooth is built in.
- Bluesound Node (Gen1)
- Bluesound Powernode (Gen1)
- Bluesound Pulse (Gen1)
- Bluesound Vault (Gen1)
- NAD VM130 (Included with your BluOS Expansion Kit)
- NAD VM300 (Included with your BluOS Expansion Kit)
Instructions for connecting the Bluetooth adapter are below.
How to Use Bluetooth
The use of Bluetooth requires “pairing” it to your Bluetooth enabled control device (smartphone, tablet or computer). Please refer to your device’s Bluetooth pairing instructions for more details. You will see the name of your BluOS Player plus the letters “BT” (i.e. Kitchen BT, Living Room BT or Vault BT) in your list of available Bluetooth devices. Bluesound PULSE FLEX Players will not adopt the room name but will be located based on the default name of PULSE FLEX aaaa BT with aaaa being the last four characters of the Player's MAC Address located on the bottom of the Player.
- If required, insert the Bluetooth 4.0 adapter into the rear USB port on the 1st Generation Bluesound Player or NAD VM130/300 MDC
- “Pair” the smartphone, tablet or computer to the BluOS Player by selecting the name under the Bluetooth settings of the device (e.g. KitchenBT)
- In the BluOS App, open the Players Drawer and select the desired player
- Open the Navigation Drawer and select Bluetooth from Local Sources
- Adjust volume to a desired level
- Open the music source on the smartphone, tablet or computer and start playing music
- To return to other sources, simply select them from the Navigation Drawer
If you would like to group the Bluetooth streamed song to other BluOS Players, simply open up the Players Drawer and press the Group button. Select your other Rooms using the + button and press Done. Adjust volume and enjoy!
BluOS Bluetooth Settings
To select your preferred Bluetooth method, with the Player connected to Bluetooth selected, in the Navigation Drawer, open the Settings menu and select Bluetooth. This option will not appear Players requiring a USB Adapter but no adapter is inserted.
Four modes are available with descriptions.
Manual: Allows you to switch between Bluetooth as a Local Source in the Navigation Drawer.
Automatic: Allows BluOS to playback Bluetooth automatically when your connected Bluetooth device starts playing audio (Default Option).
Guest: Like Automatic, Bluetooth is started in your player as a source when a connected device starts playing audio, but changing sources in BluOS disconnects the Bluetooth connection. It does not reflect Bluetooth as a Local Source in the Navigation Drawer. This configuration is ideal for situations in which multiple devices may want to link up and provide playback.
Disabled: This will turn off the Bluetooth receiver on the Player. This option is not available on BluOS Players requiring a US Adapter. To disable Bluetooth on these Players, simply remove the Bluetooth Adapter from the USB Port.
- Using the same Bluetooth adapter in multiple 1st Generation Bluesound Players can confuse your smartphone, tablet or computer. Please delete or remove the pairing relationship in your phone or tablet before moving a USB Bluetooth Adapter
- When using Apple iOS, if the Bluetooth adapter status says “Not Connected”, navigate to the Bluetooth adapter information page and select Forget this Device. Then reselect the Bluetooth adapter and pair it with the BluOS Player. When the Bluetooth adapter is paired with a Bluesound Player, its status will be “Connected”.
- When using Android, if the Bluetooth adapter name is incorrect, refresh by searching for devices and the name will be corrected. If the Bluetooth adapter status is blank, or does not show as “Connected”, navigate to the Bluetooth adapter information page and select Unpair. Then reselect the Bluetooth adapter and pair it with the Bluesound Player. When the Bluetooth adapter is paired with a Bluesound Player, its status will be “Connected”.
- If you are experiencing connection problems with the Bluetooth 4.0 adapter, remove power from BluOS Player, wait 30 seconds, power it up again and follow the connection instructions above.
- When grouping using Bluetooth, the Player with the USB adapter installed MUST be the Primary Player of the Group.
- BluOS Players are not equipped with a Microphone. Bluetooth cannot be used for two way communications such as a telephone headset or Skype.
- The IOGear GBU521 Bluetooth 4.0 USB adapter and Targus 4.0 Micro USB Adapter are both BluOS certified and approved by BluOS for 1st Generation Bluesound Players. All other adapters may have performance issues or not work at all.